Cross beam-mounted load weighing device, with 6.5 ft • 2-meter cord and all necessary mounting hardware, 0-20, 4-20 or 0-24 mA analog output
This load weighing sensor mounts on the cross beams. An LM3D-EMC-CSA control unit is required (see page 65). Test weights are also required for calibration.
USE ONE SENSOR when the cab capacity is 2200 lbs • 1000 kg or less, AND when the cross beams are xed to the same vertical beam,
AND when the cab is situated symmetrically within the car sling.
USE TWO SENSORS when the cab capacity exceeds 2200 lbs • 1000 kg, OR when the depth of the cab is 1.4x the cab’s width,
OR when the cab is NOT situated symmetrically within the car sling.